Senin, 27 Juni 2011

Clore Automotive JNC660 1700 Peak amp 12V Jump Starter



Product Features
1700 peak ampere
Battery status indicator gauge
46 inch heavy-duty #4 cables
DC outlet to power 12 volt accessories
This item is not for sale in Catalina Island

Product Specifications
Product Information
Brand: Clore Automotive
Manufacturer Part Number: JNC660
Sizing and Specifications
Item Weight: 18 Pounds
Height: 5.10 inches
Length: 16.30 inches
Width: 14.10 inches

When I want a radio, I go to buy a radio. I don’t want one that can act as a mixer, give me back massages and pedicures, and do all sorts of other functions. So when I want a jump starter, I have a very specific function in my mind for it. I simply want it to be powerful enough to jump start my absolutely dead battery. If I am stranded in the middle of a highway with a dead battery, I want a reassurance that the jump starter will solve my problem. I want an ultra-powerful unit that can effectively kick some life into the absolutely flat car battery.

What to look for
While buying a jump starter, the only main criteria should be: how much power does it pack? Normal jump starters available in the market don’t have enough power to jump start a 6 or 8 cylinder car. It might power your mobile, iPod, and radio, but what use it is if it can’t restart your car? The iPod and radio are not emergency appliances. The dead car battery can lead to a lot of inconvenience, so turn a deaf ear to the products that promise to do a lot more with your jump starter.
Go in for the Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter simply because it is a no fuss appliance that promises to deliver. With 1700 ampere power, you can be rest assured that your car battery will get the initial start it requires.

A word of caution
If you have already used some other jump starter and have recently started using this one or if you are a novice at operating such appliances, here are some things you must keep in mind:
Be very careful when attaching the jumper cables. It is important that you connect the correct terminals. Join the positive end of the jump starter to the positive end of the car battery. If the terminals are not connected to the correct terminals, sparks might fly. This can do damage to both the batteries. In many other jump starters, there is a built-in alarm or a reverse hook up warning alarm to warn you in case the terminals are attached incorrectly.
When you recharge the Jump-N-Carry jump starter, you can’t simply leave it to recharge and go off for a few days. There is no system that will prevent the battery from getting overcharged. You have to keep an eye on the battery pack while it is getting recharged.
There is no system that removes power from the cables while you are setting it up, so while joining the terminals, you have to be careful not to get electrocuted yourself.
Some jump starters have digital displays that keep you informed about the state of the battery and charge of the booster box. There is a voltmeter in the front panel, and you have to be able to read it correctly.

What are the uses of Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter?
The Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter is a professional grade item and is used by many tow truck professionals. You can find them in garages or car showrooms that require the heavy duty stuff. It is not meant for novices, as they might not be able to handle it properly. It is not dummy proof, so if all you know about a car is how to fill the gas, then it’s time you get some technical knowledge.
The unit has terrific charge. Even if you keep it for about 2 months without recharging, it still does not get drained. This is unlike the other jump starters available in the market that get drained within a month if not recharged. Honestly speaking, how many of us have the time and inclination to keep recharging the jump starter on a regular basis? I’d personally like a jump starter that can help me in my hour of need and not be drained due to lack of use.

How much does it cost?
The Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter is priced at $269.92. However, at amazon.com, you can buy it for $131.90. You get a whopping 51% saving since you save about $138.02. The shipping of this item is absolutely free, and it can be shipped anywhere in USA.

What can I expect in this pack?
The Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter weighs 21.4 pounds and its dimensions are 16.3×14.1×5.1 inches. The pack comes with:
1700 peak amperes
4 gauge cables measuring 46”
It has industrial gauge clamps that can get through to acid corroded battery terminals.
The pack is easy to recharge. You can simply plug it into the wall socket and recharge after use.

Do I get some warranty?
The Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter comes with a redeemable gift certificate. In case there is any defect or malfunction, you can take the unit back to the company, and after paying a fee of $50 you will get an absolutely new pack without any questions asked.

Customer reviews
Most consumers have liked the Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter. It is unlike the other fancy jump starters available in the market. It is a sturdy gadget which promises to do its job. Most consumers have appreciated the fact that it does not profess to have other features such as AM/FM radio, digital clock, the ability to run a TV for 3 hours, and so on and so forth.
People want a jump starter to start a flat battery. If it does that effectively, then it is immaterial if it has other features or not, and if it is unable to jump start a car, then all other features are absolutely useless.
However, the device can be ‘topped up’ by adding a light to the pack. That will be extremely useful if you have to charge your battery at night.

Senin, 13 Juni 2011

Craftsman 260 pc. Mechanics Tool Set with 3-Drawer Flip-Top Blow Mold Chest



Product Description

This 260 pc. Mechanic's Tool Set Assortment includes popular size sockets in three drive sizes to handle most jobs around the house or job site. The set provides screwdriver and nutdriver capability using a magnetic spinner handle and bits and a blow mold tool chest with lift-top lid for additional storage. Carry with you for any job. The drawers come out if needed and locking bars prevent drawers from slipping out.
Set includes:
(54) 1/4 in. Drive sockets
73 - 3/8 in. Drive sockets
(22) 1/2 in. Drive sockets
(3) Quick release teardrop ratchets in 1/4, 3/8 and 1/2 in. drive
(20) 12 pt. Combination wrenches
(20) Stubby wrenches
(68) Specialty tools including screwdriver and nutdriver bits, hex keys & extension bars
3-drawer flip-top case providing storage, organization and portability
Blow mold tool chest with lift-top lid for additional storage
Magnetic spinner handle and bits
Fully assembled
Weight: 36 lbs
Guaranteed forever

Selasa, 07 Juni 2011

E-Z Red EZLINE Laser Wheel Alignment Tool



Introducing The Most Accurate, Affordable,
Compact, Portable Laser Alignment Tool!

• Multipurpose measurement capabilities, saves time and money!

• For heavy trucks and all types of trailers.
• E-Z, fast, precise axle & wheel alignment.
• All measurements can be made in less
than 10 minutes.
• Simple 2 step instructions.
• Compact design, easy transport and storage.

The EZLINE® has many other uses in the Automotive and Commercial Vehicle Industry.
• The EZLINE® makes obtaining alignment readings on most trailer types very simple and fast, from RVs to Commercial trailers.

• Any vehicle that has a toe setting can be adjusted quickly and accurately using the EZLINE® with the addition of a straight bar and bungee cords. Obtain measurements and set toe to factory specifications on almost any vehicle, from semi tractors to golf carts.

• Frame and body shops find the EZLINE® very resourceful and cost effective. Situations that used to require sending to an alignment shop can now be dealt with in your own shop with the EZLINE®. For example: Triangling frames to check alignment, Replacing ties rod ends and bringing toe setting to factory specs, Steering wheel replacement, Rear axle alignment and many more applications.

• Classic car enthusiasts have found numerous EZLINE® uses in their shops that makes set ups simpler, more accurate and easier than with previous methods.

• Both dirt and asphalt motorsports racing crews find the EZLINE® very useful in their set ups.

Includes:
• 4 Magnetic Self-Centering Lasers • 32’ / 10M Measuring Tape
• 2 Magnetic 5th Wheel Pin Adapters • Durable Storage/Travel Case.

TSI Cheetah Bead Seating Tool - 5 Gallon Capacity, Model# CH-5



Tire Service Equipment CH-5 Cheetah Tire Bead Seating Tool

The Cheetah Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical

As the most popular bead seater model, the CH-5 has a 5 gallon capacity ASME certified tank designed for commercial use on all tires ATV to 24.5” truck tires

Easily seats the toughest tire bead-saves time and money

6 gallon capacity with ASME certified tank

Tool Weight: 27 lbs.

Product Description
Fast, easy, safer way to seat the toughest bead! U.S.A. Typical Application: Automobile, ATV, truck tires

Sabtu, 04 Juni 2011

Autel MaxiScan MS300 CAN OBD-II Scan Tool



MaxiScan® MS300
The MaxiScan® MS300 code reader supports all OBD II protocols, including the newly released Controller Area Network (CAN)
protocol. Though it is small, it is able to retrieve same information as large expensive scanners!

Complete Features:

Works with all 1996 and later OBD-II compliant US, European and Asian vehicles
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Supports CAN (Controller Area Network) and all other current OBD-II protocols
Reviews the emission readiness status of OBD monitors
Determines the malfunction indicator lamp (MIL) status
Retrieves VIN (Vehicle Identification Number) on 2002 and newer vehicles that support Mode 9
Utilizes standard 16-pin OBD-II connector meaning no additional connectors or cables are necessary
Includes CD software with over 7000 DTC definitions
No batteries required: Unit is powered via detachable OBD-II cable
Retrieves vehicle information (VIN, CIN and CVN)
Display: Backlit LCD, 2-line, 8 characters
Dimensions: length 113 mm/44", width 74 mm/29", height 21mm/083"
Weight: 027Kg/050lb

Specifications
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: 0 to 50 C (32 to 122 F)
Storage Temperature: -20 to 70 C (-4 to 158 F)
Power: 10.0 to 15.5 Volts provided via vehicle battery
Dimensions:
  Length        Width        Height
  113 mm ( 4.4")    74 mm ( 2.9")    21mm (0.83")
NW: 0.25 Kg(0.45lb), GW: 0.27Kg(0.50lb)

Energizer 84020 12V All-In-One Jump-Start System with Built-In Air Compressor and Power Inverter



Car-Inverter.com collects the best deals on car power inverters from all over the Internet. We've found an amazing deal on the Energizer 84020 12V All-In-One Jump-Start System with Built-In Air Compressor and Power Inverter.

Energizer 12 volt all-in-one jump-start system.

What's best, this item is currently on sale on Amazon.com for nearly 8% off through this link right here. The price was reduced from $149.99 to only $137.99! Furthermore, this item ships completely free with Amazon's Super Saver Shipping. Beware of other websites that charge an arm and a leg for shipping.

It's one of the best sellers on the entire site, with a Sales Rank of #1! It is sold under the Energizer brand, and Black/Gray in color. The part number is 84020, model number is 84020, and the weight is 24.8 pounds.

Let's take a look at the technical details of the Energizer 84020 12V All-In-One Jump-Start System with Built-In:

Energizer 84020 12-Volt All-In-One Jump-Start System
250 PSI internal air compressor inflates most automobile tires in 10 minutes, pressure gauge and ON/OFF switch is thermally protected from overheating, strong fabric-covered output hose with clamp-on valve stem coupler
Heavy duty 400A insulated metal battery clamps, shortened clamp and reverse polarity audio alarms, ergonomic handle that doubles as protective housing for docked clamps, an adjustable light
Two 12V DC power sockets for powering 12V devices and protection by a 30A manual-reset circuit breaker, and an internal power inverter and three-pronged socket for AC power on demand
A 12V 1 amp internal battery charger with two-stage charger allowing for the charger to be safely connected to the wall outlet indefinitely and fully charged

This item has great availability: Usually ships in 24 hours.

Key Features

Rugged polypropylene case
12V, 18Ah sealed lead-acid battery capable of delivering 350 CA
Flex-neck work light
Large, easy-to-use ON/OFF rotary switch to prevent sparking
4 AWG output cables with 24" reach
Two 12V cigarette sockets for powering 12V accessories; protected with a 30A manual-reset circuit breaker
Battery status indicator to signify the charge-state of the internal battery
12V, 1 amp internal battery charger; charger has 2-stages so the charger can be connected to the wall outlet indefinitely, allowing the internal battery to be maintained at full charge at all times.
Battery charge indicator to signify when the internal battery is charging ad when it is fully charged
"Shorted clamps" audio alarm
"Reverse polarity" audio alarm
200 watt, DC/AC power inverter internally mounted; has ON/OFF switch, one AC power outlet; fan cooled
Internal air compressor capable of inflating an automobile tire in 10 minutes
Pressure gauge and ON/OFF switch on outside, and compressor is thermally protected from overheating, has a strong, fabric-covered output hose with screw-on valve stem coupler

Product Description
Energizer 12 volt all-in-one jump-start system.

Jumat, 03 Juni 2011

Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set



Save on Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set our mission is to give you the facts you need. so you can get on the road to taking action right away. Massive Saving Order Now.Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set for the best price by Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set comparing prices offered by the top rated Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set stores online.. Great Neck PSO40 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set

Technical Details :

40-piece socket set; metric and English sizes
3/8-inch reversible ratchet and accessories
Triple chrome plated to resist rust
Includes 1/4-inch and 3/8-inch drive sockets, molded plastic case
9.8 by 1.8 by 5-inches; 2.2 pounds; lifetime warranty

Product By Great Neck Saw

Product Description

No matter what your skill level might be you will eventually find the need to use a socket set to remove or tighten a bolt or nut. Furniture assembly, automotive or appliance repairs, computer parts, cabinet drawers or doors all have nuts or bolts that hold them together. The Great Neck Hardware Machinery 40-pc. socket set contains the most commonly used standard and metric-sized sockets. The 1/4-inch and 3/8-inch drive sockets come with a 3/8-inch reversible ratchet wrench plus accessories. The wrench and sockets are chrome plated for long lasting rust resistant performance. --C. Dwight Barnett

Rabu, 01 Juni 2011

Battery Tender 021-0123 Battery Tender Junior 12V Battery Charger



Product Features

Spark proof during lead connection, reverse polarity protected and includes a 12-foot output cord and 5-year warranty
Perfect for charging all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell)
Complete 4-step charging program (Initialization, Bulk Charge, Float Mode) allows for optimization of battery power, without overcharging
Automatic charge cycle functionality switches to float mode after fully charging the battery
Solid state two color LED indicates stage of charger


Product Description

Battery Tender Junior 12V Battery Charger is much more than a trickle charger. It has a brain, is lightweight, compact, fully automatic and very easy to use especially in small spaces. This battery charger will keep the battery fully charged so that it is ready to go always. It has a microprocessor controlled fully automatic charger and maintainer and is designed to extend the life of any lead acid battery commonly used in automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, back-up generator systems, etc. Any vehicle or battery-operated piece of equipment not used on a daily or regular basis is a candidate for a Battery Tender charger. The advanced technology will bring the battery back to a full charge without overcharging and then float or maintain the battery for an indefinite period of time. The Battery Tender Junior comes equipped with alligator clips and ring terminals for easy hook up. An optional 25 feet extension cord (part number 081-0148-25) is sold separately.

Editorial Review

The Battery Tender Junior 12-volt/75-amp battery charger is the small and simple solution to the challenge of keeping vehicle batteries optimally powered when not in use. It is able to charge any lead-acid battery, including standard and sealed AGM and GEL Cell battery types and is also designed to be easy to use in small spaces, to utilize a 4-step charging program and safely function in a fully automatic mode. Taken together this makes the Battery Tender Junior 12-volt charger an excellent means of ensuring that your battery is fully charged and ready to go when you are.

OTC 6530 Ball Joint Super Set



This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks, vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans, Durango and Dakota through 2003; and Honda Accord, Civic, del Sol, and Prelude through 2001.

Combines the popular OTC 7249, 7918 and 7996 ball joint sets into one SUPER set, competitively priced.
The OTC designed and produced C-frame tool can be used alone to remove and replace universal joints.
Comes complete with an application cross reference and instructions in a blow-molded case.

Product Features

Combines our most popular ball joint sets OTC 7249 7918 and 7996 into one super set
Set allows for the removal and installation of press-fit ball joints
Covers many GM and Ford light-duty trucks vans and SUVs through 2003
Covers Dodge light trucks through 1998 and Dodge vans Durango and Dakota through 2003
Covers Honda Accord Civic del Sol and Prelude through 2001